Zenoah EXZ2610DL Owner's Manual
  1. Manuals
  2. Brands
  3. Zenoah Manuals
  4. Trimmer
  5. EXZ2610DL
  6. Owner's manual

Zenoah EXZ2610DL Owner's Manual

Hide thumbs Also See for EXZ2610DL:
Table of Contents

Advertisement

Quick Links

Download this manual
EXZ2610DL
Original Language
OWNER'S MANUAL
MULTI PURPOSE
TRIMMER
EXZ2610DL
115335410 (001)
G
G
B
B
GB-1

Advertisement

Table of Contents
loading

Related Manuals for Zenoah EXZ2610DL

Summary of Contents for Zenoah EXZ2610DL

  • Page 1 EXZ2610DL 115335410 (001) OWNER’S MANUAL MULTI PURPOSE TRIMMER EXZ2610DL Original Language GB-1...
  • Page 2 EXZ2610DL EXPLANATION OF SYMBOLS AND SAFETY WARNINGS WARNING!!! RISK OF DAMAGING HEARING Wear head, eye and ear protection. SOUND LEVEL VIBRATION LEVEL ISO 22868 ISO 11094 ISO 22867 MODEL ISO 11680-1 LpAeq ahv.eq guaranteed BC-EX 25.4 cm 95 dB(A) 5.3 m/s LRT-EX 25.4 cm...

  • Page 3: Table Of Contents

    COUNCIL’S DIRECTIVE. The products referred to are : DESIGNATION : MULTI PURPOSE TRIMMER MANUFACTURER : Husqvarna Zenoah Co., Ltd. MODEL : EXZ2610DL SERIAL NUMBERS DATING : 2010 and onwards (The year is cleary stated on the rating plate,...

  • Page 4: Parts Location

    EXZ2610DL 1. Parts location EXZ2610DL-PUO 11. Loop handle 12. Suspension point BC-EX 13. Stop switch 14. Throttle cable 15. Throttle trigger 16. Throttle set button 17. Shaft tube 18. Knob bolt 19. Spark arrester 10. Stater knob 11. Fuel tank 12.

  • Page 5: Specifications

    Max. output ..........1.2 Hp (0.9 kW) at 7500/min-1 (rpm) Idle speed ................3000 ±200/min-1 (rpm) Fuel ................Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Carburetor ................ Walbro Diaphragm type Spark plug ..................NGK CMR7H Fuel tank capacity ....................0.65 L...

  • Page 6: Warning Labels On The Machine

    EXZ2610DL 3. Warning labels on the machine (1) Read owner’s manual before operating this machine. (2) Wear head, eye and ear protection. (3) Wear foot protection. (4) Wear gloves. (5) Beware of thrown objects. (6) Warning / Attention (7) Keep all children, bystanders and helpers 15 meters away from the machine.

  • Page 7: For Safe Operation

    EXZ2610DL 5. For safe operation 1. Read this manual carefully until b. At night, at times of heavy fog, you completely understand and or at any other times when follow all safety and operating your field of vision might be instructions.
  • Page 8 ZENOAH 2. Check the condition of working servicing dealer for repair. area to avoid any accident by hit-...
  • Page 9 HANDLING FUEL 1. The engine of the ZENOAH prod- • IF SOMEONE COMES uct is designed to run on a mixed 1. Guard against hazardous situa- fuel, which contains highly flam- tions at all times.
  • Page 10 EXZ2610DL 5. For safe operation (PS-EX only) 1. When you finish cutting in one lo- back and maintain control of the saw. cation and wish to continue work (3) Make certain that the area in in another spot, turn off the en-...

  • Page 11: Set Up

    EXZ2610DL 6. Set up A Package contains the items as illustrated. EXZ2610DL-PUO BC-EX LRT-EX PS-EX (1) Shaft tube (10) Wrench (21) Shaft tube (2) Handle (11) Wrench (22) Cutting device (3) Bolt (12) Bar (23) Blade cover (4) Engine unit (13) Owner’s manual...
  • Page 12 EXZ2610DL 6. Set up MOUNTING ENGINE INSTALLING HANDLE (BC-EX, LRT-EX only) NOTE The handle is put during the arrow mark. 1. Push the shaft tube toward the clutch housing and rotate it by hand to check that the power transmission shaft is engaged with the gears.
  • Page 13 EXZ2610DL 6. Set up (BC-EX only) INSTALLING CUTTING ATTACHMENT GUARD 4. When correctly adjusted, check the correct working FOR TRIMMER HEAD of the harnesses' QUICK RELEASE. • Attach the cutting attachment guard with the bolts combined to the shaft tube while inserting the spacer between the guard and the shaft tube.
  • Page 14 EXZ2610DL 6. Set up 6. Set up (LRT-EX only) (PS-EX only) ATTACHING THE TRIMMING MECHANISM ATTACHING THE PRUNING MECHANISM (1) Tube (2) Transmission (3) Screw hole (4) Screw (5) Fastening bolt (1) Tube (2) Transmission (3) Screw hole (4) Fastening bolt 1.
  • Page 15 EXZ2610DL 6. Set up (PS-EX only) WARNING WARNING Pay attention to the correct direction of the saw It is very important to maintain the proper chain chain. tension. Rapid wear of the guide bar or the chain coming off easily can be caused by improper ten- 3.

  • Page 16: Fuel And Chain Oil

    • The Zenoah engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. WARNING If Zenoah oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle en- 1. Select flat and bare ground for fueling.

  • Page 17: Operation

    EXZ2610DL 8. Operation STARTING ENGINE 5. Set the stop switch to the “-” position. Set the throttle trigger to the start position (1 → 2 → 3). WARNING Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.
  • Page 18 EXZ2610DL 8. Operation 7. Move the choke lever downward to open the choke. ADJUSTING THROTTLE CABLE And restart engine. • The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required and tighten the screw up.
  • Page 19 • Make the right and left lines the same length when times when the unit is operated. using the nylon line head. (Be sure to install the genuine Zenoah cutting attach- TRIMMING GRASS AND WEEDS ment guard when using the nylon line head.) •...
  • Page 20 Change the loop handle to the J-handle for safe opera- tion. • When replacing blade always be sure to use prod- ucts, which have been certified by ZENOAH. WARNING When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.
  • Page 21 EXZ2610DL 8. Operation (Optional blade usage BC-EX only) STARTING THE ENGINE OPERATION Please refer to 5. For safe operation (P. 7 ~ 9), 8. Ope- 1. Check the bolt to fasten the blade and be sure the ration (P. 16 ~ 17).

  • Page 22: Saw Blade

    EXZ2610DL 8. Operation (Optional blade usage BC-EX only) WARNING MAINTENANCE BLADE Make sure to use harness and cutting attachment • Check the blade and the fasteners for looseness, guard. If not, it is very dangerous when you slip or cracking, or bending.
  • Page 23 EXZ2610DL 8. Operation 8. Operation (LRT-EX only) (PS-EX only) WARNING Checking oil supply After starting the engine, run the chain at medium speed This product is equipped with extremely sharp blades, and see if chain oil has scattered off, as shown in the and when used improperly these blades can be ex- figure.
  • Page 24 EXZ2610DL 8. Operation (PS-EX only) Adjust the pump as follows: 1. Stop the engine and make sure the stop switch is in the OFF position. 2. Place the unit on its side with the oil reservoir up. (1) Oil tank (2) Chain cover...

  • Page 25: Maintenance

    EXZ2610DL 9. Maintenance Every Every Every Before System/components Procedure Note hours hours hours after after after ✔ fuel leaks, fuel spillage wipe out ✔ ✔ fuel tank, air filter, fuel filter inspect/clean replace, if necessary see adjusting replace carburetor ✔...
  • Page 26 EXZ2610DL 9. Maintenance SPARK PLUG SPARK ARRESTER • Starting failure and misfiring are often caused by a • The muffler is equipped with a spark arrester to pre- fouled spark plug. Clean the spark plug and check vent red hot carbon from flying out of the exhaust out- that the plug gap is in the correct range.
  • Page 27 EXZ2610DL 9. Maintenance 9. Maintenance (BC-EX only) IMPORTANT REFILLING TRIMMING LINE 1. For replacement line, use a diameter of 2.4mm(.095in). • If waste gets stuck and causes blockage around the The spool is capable for a line upto 6m(20ft) on the intake air cooling vent, it may cause the engine to over- 10cm(4”) head.
  • Page 28 If the blades become so worn down that it is no longer possible to eliminate the gap between them, you should contact the au- thorized ZENOAH servicing dealer from which you purchased your ZENOAH trimmer to have the blades resharpened or re- placed. TRANSMISSION The reduction gears are lubricated by multipurpose, lithium-based grease in the transmission.
  • Page 29 EXZ2610DL 9. Maintenance (PS-EX only) OILING PORT SPROCKET Dismount the guide bar and check the oiling port for Check for extensive wear, and replace it when the teeth clogging. are worn over 0.3 mm. 0.3 mm (1) Oiling port (1) Sprocket GUIDE BAR Remove sawdust in the bar groove and the oiling port.
  • Page 30 EXZ2610DL 9. Maintenance (PS-EX only) Place your file on the cutter and push straightforward. Make sure every cutter has the same length and edge Keep the file position as illustrated. angles as illustrated. (4) Cutter length (5) Filing angle (6) Side plate angle...

  • Page 31: Storage

    → clogged with dust → air blow or wash cylinder fin, fan cover → clogged with dust → consult with the repair specialty store When your unit seems to need further service, please consult with our ZENOAH service shop in your area. GB-31...

  • Page 32: Limited Warranty

    WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF THE PURCHASER SHALL BEAR COSTS OF TRANS- INSTRUCTION LISTED IN THE OWNER/OPERATOR PORTING THE UNIT TO AND FROM THE ZENOAH MANUAL FOR PROPER USE AND MAINTENANCE OF DEALER. THE UNITS ACCIDENT MISHANDLING, ALTERATION,...

Table of Contents