Table of Contents
Advertisement
Janome 7360 Instruction Manual
Quilting
Machine setting
q Pattern
w LED display
e Foot
r Quilting bar
Loosen the quilting bar screw on the back of the foot
holder and insert the quilting bar into the hole. Set the
quilting bar at the desired position and tighten the
screw to secure it.
Sew tracing the previous seam with the quilting bar to
keep constant seam spacing.
q Quilting bar screw
w Hole
e Quilting bar
r Seam spacing
Pin Tucking
Machine setting
q Pattern
w LED display
e Foot
Fold the fabric with wrong side together.
Position the fabric so that the needle pierces 0.1–0.2
cm (1/16") inside of the folded edge, and lower the
foot.
Turn the guide screw and move the guide next to the
folded edge. Sew guiding the folded edge along the
guide.
Open the fabric and press the tucks to one side.
q Guide screw
w Guide
e Folded edge
www.aaasewing.com
A: Zigzag foot
G: Blind hem foot
q
r
q
70
Magnolia 7360 Sewing Machine
w
e
r
q
w
e
w
e
q
w
e
7360 Owners Manual/ User Guide
Advertisement
Table of Contents
