Table of Contents
Advertisement
60
1-1. For safe use
Forward-facing Convertible seat
■
Place the child restraint sys-
1
tem on the seat facing the
front of the vehicle.
If your child restraint system
interferes with a head restraint
and cannot be installed properly,
install the child restraint system
after
removing
restraint. (→P. 129)
Run the seat belt through the
2
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
Fully extend the shoulder belt
3
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
While
4
restraint system into the rear
seat, allow the shoulder belt
to retract until the child
restraint system is securely
in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
If the child restraint has a top tether strap, the top tether strap
5
should be latched onto the top tether strap anchor. (→P. 62)
the
pushing
the
head
child
I n f o r ma t i o n P r o v i d e d b y :
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
