Toyota Corolla 2016 Owner's Manual page 109

Setting and canceling the functions
■
To switch between set and canceled, follow the procedure below:
Vehicles without a smart key system: Close all the doors and
1
switch the engine switch to the "ON" position. (Perform step
within 20 seconds.)
Vehicles with a smart key system: Close all the doors and switch
the engine switch to IGNITION ON mode. (Perform step
within 20 seconds.)
Shift the shift lever to P or N,
2
and press and hold the
driver's door
(
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to cancel the function.
Function
Shift position linked door lock-
*
1
ing function
Shift position
unlocking function
Speed linked door locking func-
*
2
tion
Driver's door
unlocking function
*
1
: Vehicles with an automatic transmission or continuously variable transmis-
sion
*
2
: Vehicles with a smart key system
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
3-2. Opening, closing and locking the doors
lock switch
or
) for
to the
linked door
*
1
linked door
I n f o r ma t i o n P r o v i d e d b y :
Shift lever Driver's door lock
position switch position
P
N
107
2
2
3