Related Manuals for Vax Home Pro
Summary of Contents for Vax Home Pro
- Page 1 Steam Cleaner Home Pro User Guide Vax Careline: (AU) 1300 361 505 (NZ) 0800 800 900 vax.com.au VX21...
-
Page 3: Machine Overview
Scraper tool Concentration nozzle Window squeegee/upholstery tool Velcro microfibre pad (x1) Floor head Measuring jug Funnel 3pc extension tubes Upholstery tool cloth (x2) Carpet glider Tool storage NOTE: Items 10-17 are stored onboard at the rear of the unit. vax.com.au... -
Page 4: General Safety Information
Please make sure that the product is unplugged from the this steam cleaner with a damaged cord or plug. If the supply mains and call the Vax Careline on AU 1300 361 505 cord is damaged return the steam cleaner to a Vax / NZ 0800 800 900. - Page 5 To re-start the machine, plug it into an electrical outlet and switch it back on. IMPORTANT: We recommend the use of a Residual Current Device with a Residual Current rating of 30mA or less. vax.com.au...
-
Page 6: Getting Started
Getting Started Assembling your steam cleaner Attach hose to unit. Attach extension tube to handle. Attach extension tubes together. To remove the tube/s press the white release button. Attach extension tube to floor head. Attaching small tools IMPORTANT: Do not attach/remove accessories while steamer is in use. (Hot water may drip out of the accessory-risk of scalding) Concentration nozzle must be attached before fitting the... -
Page 7: Before You Begin Cleaning
IMPORTANT: Do not use hot or boiling water to fill clean water tank. Do not over fill the water tank. IMPORTANT: Do not operate your steam cleaner without water in the clean water tank. vax.com.au... -
Page 8: Refilling Water During Operation
Getting Started Filling detergent tank IMPORTANT: Do not mix Vax detergent with any other cleaning detergent. This product can be used with or without detergent. Detergent tank is located in the hose/handle assembly. Place the hose/handle assembly Pour 50ml of Vax detergent on a flat surface. -
Page 9: How To Use
After approximately 12 minutes Release steam handle safety latch. To produce steam, squeeze the Green LED will illuminate trigger in short bursts. To prevent showing steamer is ready to use. overly wetting floors, do not hold down continuously. vax.com.au... - Page 10 Squeeze/release trigger to dispense detergent. REFRESH CARPETS WARNING: Only use recommended Vax Steam Detergent. IMPORTANT: Please refer to the floor manufacturer’s care recommendations before use and test steam mop on a discrete area of flooring to begin with.
-
Page 11: Refreshing Carpets
Release steam handle safety latch. To produce steam, squeeze the microfibre pad attached) into trigger in short bursts. To prevent carpet glider. overly wetting, do not hold down continuously. Move the steamer slowly backwards and forwards paying particular attention to high traffic areas. vax.com.au... - Page 12 How To Use Using the small tools IMPORTANT: Test a hidden area before use. Do not use on non-stick surfaces. Concentration nozzle Brushes Metal brush Use to remove soap scum in Agitate stubborn grease For oven grills and racks. baths and shower enclosures and grime.
- Page 13 Removing the velcro microfibre cleaning pad IMPORTANT: Allow the unit to fully cool down before performing any maintenance or troubleshooting checks. Once cooled, lift microfibre cloth from floor head by releasing the velcro grip. vax.com.au...
- Page 14 Looking After Your Machine Cleaning the pads IMPORTANT: Never use bleach or fabric softener when washing the cleaning pad. 1. Machine washable at warm temperature (40°C max). Always use a mild detergent. 2. Allow to fully dry before use (24 hours) or tumble dry on a low heat.. After steamer use/storage IMPORTANT: Steam cleaner must have completely cooled down before storing.
- Page 15 • The power cord may be damaged; if it is it must be replaced by the manufacturer, or a Vax authorised service agent. Why is the steam cleaner not producing steam? • Ensure that the mains power is switched on and the power button has been pressed on the unit.
-
Page 16: Other Information
8.30am to 5.00pm Any queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the steam cleaner before calling. For the nearest Service Agent, please call the Vax Careline or visit vax.com.au... - Page 17 Notes vax.com.au...
- Page 18 Notes...
- Page 19 Notes vax.com.au...
- Page 20 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia www.vax.com.au Careline AU: 1300 361 505 www.vax.co.nz Careline NZ: 0800 800 900...