Replacing Heart Rate Monitor Battery; Troubleshooting - Garmin vivofit Owner's Manual

Replacing the Heart Rate Monitor Battery
1
Locate the circular battery cover on the back of the heart rate
monitor.
2 Use a coin to twist the cover counter-clockwise until it is
loose enough to remove (the arrow points to OPEN).
3 Remove the cover and the battery.
4 Wait 30 seconds.
5
Insert the new battery with the positive side facing up.
NOTE: Do not damage or lose the O-ring gasket.
6 Use a coin to twist the cover clockwise back into place (the
arrow points to CLOSE).
After you replace the heart rate monitor battery, you may need
to pair the heart rate monitor with the device again.

Troubleshooting

My device won't turn on
If your device no longer turns on, you may need to replace the
batteries.
Go to Replacing the vívofit 2 Device Batteries, page
My step count does not seem accurate
If your step count does not seem accurate, you can try these
tips.
• Wear the device on your non-dominant wrist.
• Carry the device in your pocket when pushing a stroller or
lawn mower.
• Carry the device in your pocket when actively using your
hands or arms only.
NOTE: The device may interpret some repetitive motions,
such as washing dishes, folding laundry, or clapping your
hands, as steps.
The step counts on my device and my Garmin
Connect account don't match
The step count on your Garmin Connect account updates when
you synchronize your device.
1
Select an option:
• Synchronize your step count with the Garmin Connect
application (Synchronizing Your Data with Your Computer,
page 1).
• Synchronize your step count with the Garmin Connect
Mobile app (Synchronizing Your Data with the Garmin
Connect Mobile App, page
2
Wait while the device synchronizes your data.
Synchronizing can take several minutes.
vívofit 2 Owner's Manual
4.
1).
NOTE: Refreshing the Garmin Connect Mobile app or the
Garmin Connect application does not synchronize your data
or update your step count.
My device does not display the correct time
The device updates the time and date when you synchronize
your device to a computer or mobile device. You should
synchronize your device to receive the correct time when you
change time zones, and to update for daylight saving time.
1 Confirm that your computer or mobile device displays the
correct local time.
2
Select an option:
• Synchronize your device to a computer
Your Data with Your Computer, page
• Synchronize your device to a mobile device
(Synchronizing Your Data with the Garmin Connect Mobile
App, page 1).
The time and date are updated automatically.
I don't have a computer or mobile device
You can turn on the device and use it with limited functionality,
until you complete the setup process on a computer or mobile
device. Prior to setup, you can use only the step count, auto
goal, move bar, and heart rate monitor (if packaged with your
device). Your device resets your step count once a day. The
device attempts to reset your step count while you are sleeping,
based on your inactivity level from your first day of use. Your
device does not store any history data until setup is complete.
Set up the device on a computer or compatible mobile device
(Getting Started, page 1) to use additional device features.
NOTE: Setup is a one-time process, and it allows you to use
all available device features.
Turning on the Device
Select the device key
Replacing the Band
1
Remove the module from the band.
2 Insert the module into the replacement band.
The device key on the module must be aligned with the key
on the band.
(Synchronizing
1).
.
5