Basic Settings; Wireless; Access Point Mode - D-Link DAP-2230 User Manual

Section 3 - Configuration

Wireless

Select 2.4 Ghz from the drop-down menu.
Band:
Mode: Select Access Point from the drop-down menu.
The other three choices are WDS with AP, WDS, and wireless Client.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
Name local area network (WLAN). The SSID's factory default setting is dlink. The
(SSID): SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
Visibility: across the network, thus making it visible to all network users. This feature
is enabled by default.
Auto Enabling this feature automatically selects the channel that provides the
Channel best wireless performance. Enable is set by default. The channel selection
Selection: process only occurs when the AP is booting up.
Channel: All devices on the network must share the same channel. To change the
channel, first toggle the Auto Channel Selection setting to Disable, and then
use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless
settings.
D-Link DAP-2230 User Manual

Basic Settings

Wireless

Access Point mode

16