Wireless Client Mode - D-Link DAP-2230 User Manual

Section 3 - Configuration
Wireless Select 2.4 Ghz from the drop-down menu.
Band:
Mode: Wireless Client is selected from the drop-down menu.
The other three choices are Access Point, WDS with AP, and WDS.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID's factory default setting is dlink. The
Name
SSID can be easily changed to connect to an existing wireless network or to
(SSID):
establish a new wireless network.
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
Visibility: across the network, thus making it visible to all network users. Disabling
SSID is not supported in Wireless Client mode.
Auto Enabling this feature automatically selects the channel that will provide
Channel the best wireless performance. This feature is automatically enabled in
Wireless Client mode. The channel selection process only occurs when the
Selection:
AP is booting up.
Channel: To change the channel, use the drop-down menu to make the desired
selection. (Note: The wireless adapters will automatically scan and match
the wireless settings.)
Channel
Indicates whether the device is capable of 20 MHz operation only or both
Width: 20 MHz and 40 MHz operation.
Click on the Scan button to search for available wireless networks, then
click on the available network that you want to connect with.
D-Link DAP-2230 User Manual

Wireless Client mode

22