Security Menu - ECS B75H2-AM2 User Manual

Security Menu

This page enables you to set setup administrator and password.
Main Advanced Power
Supervisor Password :
User Password :
HDD Password :
Change Supervisor Password
Change HDD Password
Current TCM Status
NO TCM Hardware
Removable Device Boot
Boot Sector Virus Protection
BIOS Write Protect
Version 2.14.1219. Copyright (C) 2002-2012, Acer Inc.
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
HDD Password (Not Installed)
This item indicates whether a HDD password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Change HDD Password (Press Enter)
When the system is cold boot, you can select this option and press <Enter> to
access the sub menu to change the HDD password.
Removable Device Boot (Enabled)
This item enables or disables support the boot from USB mass storage devices.
Boot Sector Virus Protection (Disabled)
Enabled or disabled writes to Hard Disk Sector 0.
BIOS Write Protect (Disabled)
Use this item you can enable or disable the BIOS Write Protect.
BIOS Setup Utility
Security Boot Options
Not Installed
Not Installed
Not Installed
[Press Enter]
[Press Enter]
[Enabled ]
[Disabled]
[Disabled]
Using BIOS
Exit
Valid Keys:
(1)a-z (A-Z) non case sensitive
(2)0, 1-9
(3)11 special keys:'-=[]\;',./
(4)key pad: 0-9 support and
/*-+.(5 special keys)
(5)Only support scan code
:Move
Enter : Select
+/-/Spacebar : Change Opt.
F7: Load User default Settings
F8: Save as User Default
Settings
F9: Load Default Settings
F10: Save & Exit Setup
ESC: Discard changes and Exit
Setup
41