Memory Seat And Mirrors; Rear Washer/Wiper - Cadillac SRX Personalization Manual

3628 Guide.qxd 9/3/03 5:40 PM

MEMORY SEAT AND MIRRORS

(if equipped)
The buttons to set the seat and mirror
memory are on the driver's armrest. To
set the memory, first adjust the driver's
seat, including the seatback recliner,
both outside mirrors, the throttle and
brake pedals, audio settings and HVAC
settings.
1. Press and hold button 1 until two
beeps are heard to confirm memory
setting.
2. Repeat the procedure using button 2
to store memory for a second driver.
Page 10
S R
Setting Exit Position
1. Press button 1 or the unlock symbol
on the keyless entry fob with number 1
on the back. Adjust the driver's seat to
the desired exit position.
2. Press and hold the exit button,
located above buttons 1 and 2 on the
driver door armrest until two beeps are
heard to confirm exit memory setting.
Repeat the procedure for a second
driver using button 2 and the key fob
with 2 on the back.
To recall stored exit positions, press and
release the exit button. A beep will
sound and the seat will move to the
memory exit position for the identified
driver. If no exit position is stored, the
seat will move all the way back.
The vehicles must be in PARK to recall
the exit position.
For further programming instructions for
seat and mirror memory, refer to the
Owner Manual or Personalization
Instructional CD and Booklet.
X
INSTRUMENT PANEL AND
COURTESY LIGHTS
Slide the lever in the overhead console
forward to brighten the panel lights and
past the resistance point to turn the
courtesy lights on. Slide the lever in the
opposite direction to turn off the
courtesy lights or dim the panel lights.

REAR WASHER/WIPER

The rear washer/wiper
control is located in the
overhead console. Press
the center of the switch to
wash the rear window.
Press the forward part of
the switch for delayed
wipes. Press the rear part
of the switch for steady wipes.