Table of Contents
Advertisement
Memory Seat, Mirrors and Steering
Wheel
If your vehicle has this
feature, the controls are
located on the driver's door
panel.
These buttons are used to program and recall memory
settings for the driver's seating and outside rearview
each button:
m i r r n v
nnritinnr
I
I r n
thn.
f n l l n l r r i n n ctnnc tn
r i v n n r 9 r - n
1 1 1 1 1 I " ,
pvCI,,,v,
t u .
VU"
,I IU
l " l l " Y Y l l
a y
U & " p J
&"
yB"ylu8
I I
1. Adjust the driver's seat (including the seatback
recliner, lumbar, head restraint and shoulder belt
height adjustments), both outside mirrors and
the steering whee! to a comfortable position.
3. Within five seconds, press button 1 for Driver 1. A
single beep will sound through the driver's side
front speaker to let you know that the position has
been stored.
A
second mirror, seating and steering wheel position
can be programmed by repeating the above steps and
pressing button 2 (for Driver 2). Each time a memory
button is pressed, a single beep will sound. Each
time button 1 or 2 is pressed and released while the
vehicle is in PARK (P), the memory positions will
be recalled. If the vehicle is not in PARK (P), the
memory buttons must be pressed and held to recall the
stored positions.
If you use the remote keyless entry transmitter to enter
your vehicle, automatic seat and mirror movement
will occur. The numbers on the back of the transmitters,
1 and 2, correspond to the numbers on the buttons
on the door panel.
When the key is placed in the ignition in OFF and you
have entered the vehicle without using the remote
keyless entry transmitter, the seats and mirrors
will automatically adjust to the programmed position of
the last driver.
2-49
Advertisement
Chapters
Table of Contents
