Automatic Dimming Rearview Mirror; Power Outside Rearview Mirrors; Memory Seat And Mirrors - Cadillac 2008 CTS Customer Convenience/Personalization Manual

70520_08a_CTS_QRG_062207.qxp:CTS 2007 A
AUTOMATIC DIMMING
REARVIEW MIRROR
The automatic dimming feature
becomes active every time the
vehicle is started.
(On/Off): Press this button to turn
the automatic dimming mirror off or
back on while driving. The symbol on
the button will illuminate when
automatic dimming is active.
POWER OUTSIDE REARVIEW
MIRRORS
The controls for both outside
rearview mirrors are located on the
driver's side armrest.
1. Press the left or right side of the
rocker switch to operate the
Refer to Owner Manual for further information.
Driver
Information
6/22/07
desired outside mirror. The neutral
position will turn the power
operation capability off.
2. Press the directional arrow on the
control button to move the mirror
in that direction.
The mirrors can be folded manually
inward to prevent damage in car
washes or garages. Return the
mirrors to their normal positions
before driving. The mirrors also are
heated to clear fog, snow or ice
when the rear defogger is on. Refer
to the Comfort/Convenience section
of this guide.

MEMORY SEAT AND MIRRORS

Setting Driver's Position
The buttons to set the seat and
mirror memory are on the driver's
doors. Adjust the driver's seat,
including the seatback recliner and
both outside mirrors.
1. Press and hold button 1 until two
beeps are heard to confirm
memory setting.
2. Repeat the procedure using button
2 to store memory for a
second driver.
Safety & Comfort/
Security Convenience
4:17 PM Page 13
Setting Exit Position
1. Press button 1 or the Unlock
2. Adjust the driver's seat to the
3. Press and hold the exit button
To recall stored exit positions, press
and release the exit button
beep will sound and the seat will
move to the memory exit position
for the identified
driver. If no exit
position is stored,
the seat will
move all the
way back.
Seats & Mirrors Audio/
Personalization/
Communication
button on the keyless entry
transmitter with number 1 on the
back.
desired exit position.
until two beeps are heard to
confirm exit memory setting.
Repeat the procedure for a second
driver using button 2 or the
Unlock symbol on the keyless
entry transmitter with 2 on the
back.
J Reviewed with Customer (Please Check Box)
Powertrain & Owner
Maintenance Privileges™
. A
11