Names And Function; Front Panel - Marantz SR6003 User Manual

NAMES AND FUNCTION

FRONT PANEL

q w e r t y
!9 !8 !7 !6
q
POWER switch and STANDBY
indicator
When this switch is pressed once, the unit turns ON
and the display illuminates. When pressed again, the
unit turns OFF and the STANDBY indicator will be
illuminated.
w
INPUT SELECTOR knob
(AUDIO/ VIDEO)
This knob is used to select the input sources. (See
page 16)
e
SURROUND MODE button
Press this button to select the surround mode.
r
AUTO (Auto surround) button
Press this button to select the AUTO mode from the
surround modes. When this mode is selected, the
unit determines the surround mode corresponding to
a digital input signal automatically.
u i o !0 !1 !2 !3
!5 !4
t
PURE DIRECT button and indicator
When this button is pressed once, "SOURCE
DIRECT" appears on the FL display. If pressed again,
"PURE DIRECT" appears. After 2 seconds, the FL
display indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
Notes:
• The surround mode is automatically switched to
AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES
y
DISPLAY button
Press this button to change the FL display mode.
u
MENU button
Press this button to enter the SETUP MAIN MENU.
i
EXIT button
Press this button to exit from the SETUP MAIN
MENU.
o
BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!0
T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The "AUTO" indicator lights in the auto stereo mode.
(See page 17)
!1
MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 51)
!2
CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 52)
!3
VOLUME control knob
This knob is used to adjust the overall sound level.
Turning the control clockwise increases the sound
level.
!4
INFRARED receiving sensor window
This window receives infrared signals for the remote
controller.
!5
AUX1 INPUT jacks
These auxiliary video/audio input jacks accept the
connections of a camcorder, portable DVD, game
etc. When not using these jacks, protect by the jack
cover.
Cursor (5, ∞, 2, 3) / ENTER button
!6
Press these buttons to operate the SETUP MAIN
MENU and TUNER function.
!7
USB jack
Connect USB media to this USB jack.
(See page 19, 47)
!8
MIC jack
Automatically measure speaker characteristics using
the included microphone. (See page 30)
!9
HEADPHONE jack for stereo headphones
This jack may be used to listen to the unit's output
through a pair of headphones. Be certain that the
headphones have a standard 1/4" stereo phono
plug.
ENGLISH
5