Specifications; Troubleshooting Chart - Remington RM1300 Operator's Manual

Motor Voltage.....................................................................................................................................A.C.,120 Volts Electric
Motor Amperage..................................................................................................................................................... 12 Amps
Blower Air Output ...................................................................................................................... up to 150 mph (241.4 kmh)
Vacuum Air Flow............................................................................................................................ up to 350 cfm (9.9 cmm)
Mulching Ratio...................................................................................................................................................... up to 10:1
Operating Weight ............................................................................................................................................ 10 lb (4.5 kg)
Vacuum Bag Capacity ......................................................................................................................... 0.75 bushels (26.4 L)
* All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
UNIT WILL NOT BLOW OR VACUUM
C A U S E
Bag full
Blocked tube
Blocked impeller
Damaged impeller
Dirty bag
Torn bag
Bag unzipped
Unit unplugged
UNIT WILL NOT START
C A U S E
Unit is unplugged
Power/Speed switch is in the OFF position
GFCI in outlet has tripped (if used)
If further assistance is required, contact your authorized service dealer.

SPECIFICATIONS*

TROUBLESHOOTING
Empty bag, as described in Empty the Vacuum Bag
Clear the blockage as described in Clearing a Blocked
Tube/ Impeller
Clear the blockage as described in Clearing a Blocked
Tube/ Impeller
Take the unit to an authorized service dealer
Clean the vacuum bag
Replace the vacuum bag
Zip up the vacuum bag
Plug into an extension cord
Check cord to make sure it is plugged into an electrical outlet
Slide switch to HIGH or LOW
Reset GFCI
A C T I O N
A C T I O N
15