Installing Add-On Cards - ECS A55F-M4 User Manual

2-4-4. Installing Add-on Cards

The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard's features and capabilities. With these efficient facilities, you can
increase the motherboard's capabilities by adding hardware that performs tasks
that are not part of the basic system.
PCIEX16 Slot
PCIE1 Slot
PCI Slot
Before installing an add-on card, check the documentation for the card care-
fully. If the card is not Plug and Play, you may have to manually configure the
card before installation.
12
The PCI Express x16 slot is used to install an external PCI Ex-
press graphics card that is fully compliant to the PCI Express
Base Specification revision 2.0.
The PCI Express x1 slot is fully compliant to the PCI Express Base
Specification revision 2.0.
This motherboard is equipped with one standard PCI slot. PCI
stands for Peripheral Component Interconnect and is a bus
standard for expansion cards, which for the most part, is a
supplement of the older ISA bus standard. The PCI slot on this
board is PCI v2.2 compliant.
A55F-M4 USER MANUAL