Marantz SR6300 User Manual page 34

EXAMPLES OF MACRO PROGRAMS
Example 1
Change the input source for the amplifier to CD and play the 3rd track
on a CD in the CD player.
1.
Press and hold the T.MODE ⁄1 and MENU button ¤2 until the
MACRO is displayed on the LCD.
• LEARN and MACRO is displayed blinking.
2.
Press the CD Function button ⁄9 . CD-M is displayed on the LCD.
3.
Press CD ⁄9 , 3 ,, and 3 ⁄8 buttons.
(2)
(3)
(1)
4.
When you are finished programming the macro, press the OK
button ⁄5 until the display returns to USE mode.
Now, execute the macro you just programmed.
1.
Press the CD Function button ⁄9 for 3 seconds.
• The macro commands are transmitted to the components in
order, and the steps of the operations are displayed on the
LCD in order.
Example 2
Turn the main amplifier ON → Change the amplifier's input source to
DVD → Set the Surround mode to VIRTUAL → Set the DVD player to
PLAY
1.
Press and hold the T.MODE ⁄1 and MENU button ¤2 until the
MACRO is displayed on the LCD.
• LEARN and MACRO is displayed blinking.
2.
Press the DVD Function button ⁄9 .
• Here the DVD Function button ⁄9 is used as the macro
button, but any function button can in fact be used.
3.
To set the various steps of the macro, press the following buttons
in order:
(1) AMP*⁄9 → (2) POWER ON ‹9 → (3) DVD ⁄9 → (4) AMP*⁄9 →
(5) 8 (VIRTUAL) , → (6) DVD* ⁄9 → (7) 3 ⁄8 .
(2)
(5)
(7)
(3) (6)
(1) (4)
4.
When you are finished programming the macro, press the OK
button ⁄5 until the display returns to USE mode.
Now, execute the macro you just programmed.
Press the DVD Function button , for 3 seconds.
1.
The macro commands are transmitted in order, and the steps of
the operations are displayed on LCD in order.
• When executing this macro, function operations AMP* and
DVD* only switch the command set of the remote controller
and no signal is transmitted to the component.
29