Remote Control Operation; Surround Mode Buttons; Operation; Function And Operation - Marantz SR4200 User Manual

REMOTE CONTROL OPERATION

OPERATION

The provided remote control unit is a universal remote controller. The
POWER button x, numeric buttons . and control buttons ⁄2 are used
in common across different input source components.
The input source controlled with the remote control unit changes when
one of the input selector buttons c is pressed.
• Example: To select the DVD as the input source and play the DVD
player.
Press the DVD button c twice within 2 seconds.
The input selector of the SR4200 is switched to DVD and
the remote control unit is set for control of the DVD player.
Press the PLAY button on the remote controller .

FUNCTION AND OPERATION

z Transmitting indicator
Lights up during a button is pressed and an infrared signal is sending.
x Main POWER buttons
Press to switch the power of the SR4200 ON or OFF after pressing the
AMP button c.
c Input selector buttons/ FUNCTION
SELECTOR buttons (AUDIO/VIDEO
INPUT)
Press one of these buttons once or twice to select a particular source
component. For example, to set the receiver to the DVD input, press
the DVD button twice within 2 seconds.
Note:
CDR/MD button is set CDR function at initial. To switch MD function,
press and hold down CDR/MD button and press 2 button ..
To return CDR function, press and hold down CDR/MD button and
press 1 button ..
v MAIN VOLUME UP ( ) /DOWN ( ) buttons
Main volume control of the SR4200. The front, surround, center and
subwoofer channel volumes controlled by these buttons simultaneously.
b MUTE button
Muting button of the SR4200. Press this button decrease the sound
temporarily . Press this button again to return to the previous sound.
n MENU button
This button is used to enter the menu functions. Use the menu functions
to setup SR4200.
m Cursor buttons ( , , , , OK)
Use these button when operating the menu functions.
See page 10.
, MENU OFF button
This button is used to return original display from menu functions.
. Numeric buttons 1 to 9 (A, B, C ... Z, –) /

Surround mode buttons

Numeric buttons
These buttons are used to enter figures in the selection of a tuner preset
station and station name preset or to set select a CD track number, etc.
The functions of these buttons are dependent on the function button
selected.
Surround mode buttons (when AMP mode is selected)
These buttons are used to select the surround mode.
Note:
The 6-STEREO button is used to 5-stereo mode for SR4200.
The CS5.1 and 6.1 buttons are unavailable for SR4200.
⁄0 P.SCAN (preset scan) button
mode is selected)
When this button is pressed, SR4200 is turned to tuner (last memory)
and preset scan starts.
⁄1 0 / A/D button
0 button
This button is used to enter the number "0"
A/D button (when AMP mode is selected)
This is used to switch between the analog and digital inputs.
⁄2 CONTROL buttons
These buttons are used when operating the CD player, TAPE deck, etc.
The function of these buttons are dependent on the function button
selected.
For the controllable functions of each input function, please refer to
following table.
TV VCR DVD
CH—
PREV PREV
CHANNEL/SKIP
NEXT NEXT
CH+
CHANNEL/SKIP
REWIND REWIND
TUNE/SERCH
FF
TUNE/SERCH
REC
MODE
CH
PAUSE PAUSE
DSIP/RDS DISPLAY
PLAY PLAY
F.DIRECT
VIDEO TV/VCR DISC +
+/A/ANT
VIDEO TV/VCR
DISC +
–/B/VCR
STOP STOP
PTY
⁄3 ATT (attenuater) button
When the input signal is too high and the voice distorts even by throttling
the SR4200 VOLUME control and PEAK indicator will light up, turn on
this function. "ATT" is indicated when this function is activated
The input level is reduced. Attenuater is invalid for use with the output
signal of "REC OUT".
⁄4 TREBLE buttons
These buttons are used to adjust the tone control of high frequency
sound for left, center and right speaker.
⁄5 BASS buttons
These buttons are used to adjust the tone control of low frequency sound
for left, center right and subwoofer speaker.
⁄6 MEMO button
Memory enable button for various preset functions.
7
(when TUNER
DSS TUNER CD TAPE CDR
CH— CH—
PREV PREV PREV
NEXT NEXT NEXT
CH+ CH+
REWIND REWIND REWIND
TUNING—
FF FF FF
TUNING+
REC REC
MODE DIRECTION
CH RDS
PAUSE PAUSE PAUSE PAUSE
DISPLAY DISPLAY
FRQ.
PLAY PLAY PLAY
DIRECT
DSS/VCR DISC + DECK A
DSS/VCR DECK B
DISC —
RDS
STOP STOP STOP
PTY
MD
PREV
NEXT
REWIND
FF FF
REC
PLAY
STOP