Samsung AJ036JCJ5 Series Installation Manual page 21

Setting indoor unit address A
Setting indoor unit address manually
Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power
supply in the indoor unit.
2. The panel (display ) should be connected to an indoor unit to receive option.
3. Before installing the indoor unit, assign an address to the indoor unit according
to the air conditioning system plan.
4. Assign an indoor unit address by wireless remote controller.
- The initial setting status of indoor unit ADDRESS (MAIN/RMC) is "0A0000-100000-200000-300000"
- There is no need to assign extra ADDRESS for 1:1 installation between indoor unit and outdoor unit.
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details
Indication
and Details
0
Option SEG7
Explanation PAGE
Remote
Controller
Display
Indication Details Indication Details
Indication
and Details
1
※ You must set RMC address setting mode when using the centralized control .
20
SEG2 SEG3
Setting Main 100-digit of indoor
MODE
address
Indication Details Indication Details Indication Details Indication Details
No Main
0
address
A
Main
address
1
setting
mode
SEG8 SEG9
Setting RMC
address
Indication Details Indication Details Indication Details Indication Details
No RMC
0
address
RMC
address
1
setting
mode
Indoor Unit
1(L)
2(N)
SEG4 SEG5
10-digit of indoor
unit address unit
0~9 100-digit 0~9 10-digit
SEG10 SEG11
Group
channel(*16)
RMC1 1~F
F2
F1
SEG6
A single digit of
indoor unit
A single
0~9
digit
SEG12
Group address
RMC2 1~F