Remote Power Control - Marantz SM-1151 User Manual

HOW TO USE AND SET FEATURES

REMOTE POWER CONTROL

By connecting this unit to a Marantz SC-11S1 stereo control
amplifier using the remote power control connection, the power
controls of this unit are operated in sync with the SC-11S1
power ON/OFF controls.
The SC-11S1 has two trigger output terminals, therefore two
SM-11S1s can be connected to one SC-11S1.
1.
Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11S1s to
be connected. Either of the following types of connection
cables are adequate.
Caution:
Do not use connecting cables that contain resistance.
• Monaural miniplug ⇔ monaural miniplug connecting
cable
• Stereo miniplug ⇔ stereo miniplug connecting cable
SC-11S1
SM-11S1
SM-11S1
20
2.
Check that the power to the unit and SC-11S1 that will be
connected to it are both OFF.
3.
After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the unit to ON.
4.
Press the POWER ON/OFF switch on the unit to switch to
standby mode.
5.
In this condition, press the POWER ON/OFF switch on the
SC-11S1, and the power of the SM-11S1 will switch ON in
sync.
TRIGGER OUT
AC IN
1
TRIGGER OUT
1 2
REMOTE POWER CONTROL
REMOTE POWER CONTROL
AC IN
REMOTE POWER CONTROL
REMOTE POWER CONTROL
ON
TRIGGER IN
OFF TRIGGER IN
Set to ON
AC IN
REMOTE POWER CONTROL
ON
TRIGGER IN
OFF
2
ON
OFF
REMOTE POWER CONTROL
ON
OFF
TRIGGER IN
Set to ON