How To Use And Set Features; Remote Power Control - Marantz SM-11S1 User Manual

I (
HOW TO USE AND SET FEATURES
I [
REMOTE POWER CONTROL
By connecting this unit to a Marantz SC-11 S1 stereo control
amplifier using the remote power control connection, the power
controls of this unit are operated in sync with the SC-11S1
power ON/OFF controls.
The SC-11 S1 has two trigger output terminals, therefore two
SM-11 S1s can be connected to one SC-11S1.
1. Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11 S1s to
be connected. Either of the following types of connection
cables are adequate.
Caution:
Do not use connecting cables that contain resistance.
• Monaural mini plug q monaural miniplug connecting
cable
~)IDIIIIIDIIIlIrr:III~===4\1\):::====OilnnlllllIIllllIlI~
• Stereo miniplug q stereo miniplug connecting cable
~J][III1IIIIDIIIIDli===~\\:\====OilnnllllilIITIlll~
SC-11S1
.
o
~';'~
I
SM-11S1
]
2. Check that the power to the unit and SC-11 S1 that will be
connected to it are both OFF.
3. After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the unit to ON.
4. Press the POWER ON/OFF switch on the unit to switch to
standby mode.
5. In this condition, press the POWER ON/OFF switch on the
SC-11 S1, and the power of the SM-11 S1 will switch ON in
sync.
TRiGGER OUT
1 2
@@
A A
~~~,'
----""""'
~
SM-11S1
r
'O"·[,j~l
20
I (
HOW TO USE AND SET FEATURES
I [
REMOTE POWER CONTROL
By connecting this unit to a Marantz SC-11 S1 stereo control
amplifier using the remote power control connection, the power
controls of this unit are operated in sync with the SC-11S1
power ON/OFF controls.
The SC-11 S1 has two trigger output terminals, therefore two
SM-11 S1s can be connected to one SC-11S1.
1. Prepare the correct number of double-ended mini plug
audio connection cables for the number of SM-11 S1s to
be connected. Either of the following types of connection
cables are adequate.
Caution:
Do not use connecting cables that contain resistance.
• Monaural mini plug q monaural miniplug connecting
cable
~)IDIIIIIDIIIlIrr:III~===4\1\):::====OilnnlllllIIllllIlI~
• Stereo miniplug q stereo miniplug connecting cable
~J][III1IIIIDIIIIDli===~\\:\====OilnnllllilIITIlll~
SC-11S1
.
o
~';'~
I
SM-11S1
]
2. Check that the power to the unit and SC-11 S1 that will be
connected to it are both OFF.
3. After completing the connections shown below, switch the
remote power control ON/OFF switch on the rear panel of
the unit to ON.
4. Press the POWER ON/OFF switch on the unit to switch to
standby mode.
5. In this condition, press the POWER ON/OFF switch on the
SC-11 S1, and the power of the SM-11 S1 will switch ON in
sync.
TRiGGER OUT
1 2
@@
A A
~~~,'
----""""'
~
SM-11S1
r
'O"·[,j~l
20