Using The Remote Control Unit - Marantz PM-82 User Manual

REMOTE CONTROL UNIT RC-82PM USING THE REMOTE CONTROL UNIT
1. Remote control
Operate the remote control unit (RC-82PM) within a distance of approx.
5 m from the infrared signal reception window (remote sensor) on the
front of the Amplifier (PM-82).
Remote control operation may not be possible if the remote control
unit's transmitter is not pointing in the direction of the remote sensor or if
there is an obstruction between the transmitter and the remote sensor.
Remote control operating range
Amplifier
Approx. 5m
oeccs
TAPE 1 TAPE2 TAPES
MUTING
Remote control unit RC-82PM
2. Loading batteries
Batteries in this remote control unit have a life of approximately 1 year
under normal operating conditions. When the remote control unit is not
to be used for an extended period of time, remove the batteries. Also,
{1] SELECTOR when you notice that the batteries are starting to run down, replace
Press one of the keys to select a desired program source. them as soon as possible.
The indicator of the selected source light up. (1) Remove the battery cover
[2] PROCESSOR
Remote control unit
Press to use a sound processor such as an equalizer, connected to the (RC-82PM)
rear panel.
i
The indicator lights up. SS
[3] MUTING SA
Press to mute the sound from the speakers.
The indicator lights up.
Press the key again to resume the previous sound.
[4] pe eore (2) Insert the batteries with correct +/— orientation.
Press to play a tape.
The indicator lights up at the moment the key is pressed. ®
Two AAA-size
[5] VOLUME
©
(SUM-4) batteries
A: Press this button to increase the volume.
V: Press this button to decrease the volume.