Rear Panel - Marantz SM-1151 User Manual

NAMES AND FUNCTIONS OF PARTS

REAR PANEL

UNBALANCED INPUT
R
PUSH PUSH
R
3 3
2 2 1 1
A
A UNBALANCED INPUT Jack
These jacks are for connecting to the unbalanced output
jacks of a control amplifi er. In BTL mode, the Lch input
terminal is used.
B BALANCED INPUT Jacks
These jacks are for connecting to the balanced output
jacks of a control amplifi er. In BTL mode, the Lch input
terminal is used.
C SPEAKER SYSTEMS Output Terminals
These jacks are for connecting to a speaker system.
You can connect 2 speaker systems to the SM-11S1,
SPEAKER SYSTEM 1 and 2. Speaker output can be
turned ON/OFF from the SPEAKERS 1 / 2 buttons on
the front panel.
When using BLT mode, connect the speaker + side to the
Lch + jack, and the speaker – side to the Rch + jack.
D REMOTE POWER CONTROL Jacks
(TRIGGER IN)
This jack controls this unit's power ON/OFF in sync with
the Marantz SC-11S1 control amplifi er ON/OFF control.
Connect to the SC-11S1 TRIGGER OUT jack using a
commercially available cable.
For more information on REMOTE POWER CONTROL,
see pg. 20.
6
G
AMP MODE
L
STEREO
BTL
R CH
BTL
BALANCED INPUT
PUSH PUSH
L
3 3
2 2 1 1
BTL
R CH
B
SPEAKER SYSTEMS
MODEL NO. SM-11S1
L CH
1
BTL
2
L CH
C
E REMOTE POWER CONTROL ON/OFF
Switch
ON: Set to control this unit's power ON/OFF in sync with
the Marantz SC-11S1 control amplifi er ON/OFF
control.
OFF: Set to use the POWER ON/OFF switch on the
front panel of the unit to switch the unit's power
ON/OFF.
F AC IN Power Cable Connection Socket
Connect this socket to the power outlet using the included
power cable.
G AMP MODE Switch
STEREO: Set to use the SC-11S1 as an ordinary stereo
power amplifi er.
BTL: Set to connect a stereo amp by BTL and use
this unit as a monaural power amp.
For more information on AMP MODE, see pg. 19.
Caution:
Always make sure that the power is OFF before
switching this switch.
F
AC IN
REMOTE POWER CONTROL
ON
TRIGGER IN
OFF
D E