Motorola MC92N0-G User Manual page 133

NOTE Prior to swapping contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC92N0-G is connectable.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
1.
OBEX Object Push Window
Figure 5-20
In the Action: drop-down list, select Swap Contact Information.
2.
Tap .
3.
Select a contact to send to the other device.
4.
Tap OK.
5.
Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to
6.
accept the contact.
Tap Ok.
7.
Fetching a Contact
To fetch a contact from another device:
NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC92N0-G is connectable.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
1.
Using Bluetooth on Windows Devices 5 - 25