Using Your Espresso Machine - Sunbeam CM1000 Instruction Booklet

Using Your Capsule Machine
1. Open the lid by firstly lifting the handle up
and then lifting the entire lid. See figure 1.
2. Choose your coffee holder.
See "The Multi-Espresso System" section.
3. Place holder inside the machine.
4. Close the lid by firstly pushing down the
lid and then push down the handle to lock
into position. See figure 2.
5. Place cup on the drip tray.
6. Press the extraction button to start the
extraction process - coffee will start
dispensing from the machine into the cup.
See figure 3.
7. Stop the extraction once the desired
amount of coffee has been reached by
pressing the extraction button again. See
figure 4.
Figure 1
After each use
8. Open the lid by firstly lifting the handle up
and then lifting the entire lid. See figure 5.
Figure 2
9. Remove the coffee holder by lifting out.
Allow the coffee or capsule to cool, open
the holder, knock coffee out of holder and
rinse in water to clean. See figure 6.
Figure 3
Figure 4
Figure 5
Figure 6
5