Mounting; Orientation; Rigging; Procedure - Chauvet Ovation FD-165WW User Manual

Setup

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
-8-
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
The OVATION™ FD-165WW comes with a hanging/mounting yoke to which you can attach
mounting clamps. The yoke has 13-mm holes, which are appropriate for this purpose. You must
supply your own mounting clamps, so be sure the clamps are capable of supporting the weight
of this product. Use at least one mounting point per product where necessary. For our Chauvet
line of mounting clamps, go to http://trusst.com/products/.
Bracket
Adjustment
Hand Shank
for the weight-bearing requirements of this
Overhead Mounting
Safety Notes. For our CHAUVET®
Mounting Clamp
Safety Cable
OVATION™ FD-165WW User Manual Rev. 1