Installation Recommendations; Building In - Miele TX3587 Operating And Installation Instructions

Installation

Installation recommendations

– To achieve optimum vapour
extraction, the rangehood must cover
the cooktop. It should be positioned
centrally over the cooktop, not to the
side.
– The cooktop should be no wider than
the rangehood and, if possible, it
should be narrower, especially for
safety distances greater than 750
mm.
– The installation area must be easily
accessible. The rangehood should be
easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the rangehood.
32

Building in

The rangehood is intended to be built
into wall units, rangehood housing
units, and above breakfast bars or
island areas.
 Check prior to installation that the top
of the appliance will be accessible
after installation.
If this is not the case, install the exhaust
ducting and prepare the mains
connection before installation.
 Place the appliance in the cut-out
from below and align it and secure it
to the frame.
The screws are suitable for a solid
installation surface made from wood.
For installation in other materials,
ensure you use appropriate means of
fixing. Make sure the structure is
able to take the weight of the
rangehood.