1. Manuals
  2. Brands
  3. Miele Manuals
  4. Cooktop
  5. TX3587
  6. Operating and installation instructions

Miele TX3587 Operating And Installation Instructions

Hide thumbs Also See for TX3587:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating and Installation Instruction
Operating and installation instructions
Gas cooktops
To avoid the risk of accidents or damage to the appliance it is essential
to read these instructions before it is installed and used for the first time.
en - AU, NZ
M.-Nr. 09 399 660

Advertisement

Table of Contents
loading

Related Manuals for Miele TX3587

Summary of Contents for Miele TX3587

  • Page 1 Operating and installation instructions Gas cooktops To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en - AU, NZ M.-Nr. 09 399 660...
  • Page 2 WO This appliance can be used in countries other than those specified on the appliance. It is, however, set up for connection to the gas and electricity supplies in the countries specified. For use in other countries please contact the Miele spare parts or customer service department in your country.

  • Page 3: Table Of Contents

    Contents Description of the appliance ......... 5 Cooktop .
  • Page 4 Contents Building-in dimensions ......... . . 34 Installation .

  • Page 5: Description Of The Appliance

    Description of the appliance Cooktop a Small burner Controls knobs for the cooking zones: b Large burner g Front left c Wok burner h Rear left d Medium burner i Middle e Medium burner j Rear right f Pan support (3 sections) k Front right...

  • Page 6: Burners

    Description of the appliance Burners Wok burner Small, medium and large burners a Burner cap b Burner head c Ignition safety device d Ignitor a Outer burner cap e Burner base b Inner burner cap c Burner head d Burner base e Ignition safety device f Ignitor...

  • Page 7: Accessories Supplied

    Description of the appliance Accessories supplied The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see "Optional accessories"). Wok ring The wok ring supplied with your appliance can be used in instances where extra stability is required.

  • Page 8: Warning And Safety Instructions

    Warning and Safety instructions Correct application This appliance complies with all This cooktop is designed for relevant local and national safety domestic use and for use in similar requirements. Inappropriate use environments by guests in hotel or can, however, lead to personal motel rooms, bed &...
  • Page 9 Warning and Safety instructions Safety with children Technical safety Children should be supervised to Before installation, check the ensure that they do not play with the appliance for visible signs of damage. appliance. Do not install and use a damaged appliance.
  • Page 10 Repairs and other work by This appliance is not intended to be unauthorised and unqualified persons could be dangerous. Miele cannot be operated by means of an external timer held liable for unauthorised work. or separate remote control system.
  • Page 11 Otherwise flames could be drawn up by mains electricity, and call Miele. the suction of the rangehood, parts of In areas which may be subject to...
  • Page 12 Take care not to let these items get cooktop. Miele will not accept liability damp or wet as this causes heat to for any damage resulting from such transfer through the material more incorrect use.
  • Page 13 While the gas cooktop is in operation, it must be used in conjunction with either a rangehood or Miele cannot be held liable for another domestic ventilation system. damage caused by non-compliance with these Warning and Safety When using an electrical appliance, instructions.

  • Page 14: Caring For The Environment

    Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packing Electrical and electronic appliances has been selected from materials often contain materials which, if which are environmentally friendly for handled or disposed of incorrectly, disposal and should be recycled.

  • Page 15: Before Using For The First Time

    Before using for the first time Please place the extra data plate on a surface near the cooktop such as the cupboard door if the labels on the base of the cooktop are not visible after installation. If the labels on the base of the cooktop are visible after installation, the additional data plate label can be placed in the space provided in the "After sales service"...

  • Page 16: Operation

    Operation Rapid ignition system The appliance is supplied with a rapid ignition system with the following features: – Rapid ignition without pressing and holding in the control knob. – Automatic re-ignition The burner is re-ignited if the flame is extinguished due to a draught, for example.

  • Page 17: Switching On

    Operation Switching on While the gas cooktop is in operation, it must be used in conjunction with either a rangehood or another domestic ventilation system. ^ To ignite the burner, press the control knob down and turn it anti-clockwise to the largest flame symbol. The ignitor will make a clicking sound and ignite the gas.

  • Page 18: Regulating The Flame

    Operation Regulating the flame Control the flame so that it does not spread out beyond the sides of the pan. As the outer part of the flame is much hotter than the centre, the tips of the flames should stay beneath the pan base.

  • Page 19: Pans

    Pans Burner Min. pot/pan base diameter in cm Small burner Medium burner Large burner Wok burner Max. diameter at top of pot/pan in cm without with Combi insert Small burner Medium burner Large burner Wok burner – Refer to the chart above and ensure that the pot/pan diameter falls within the minimum and maximum diameters given for the burner you are using.

  • Page 20: Wok Ring

    Pans Wok ring The wok ring supplied with your appliance can be used in instances where extra stability is required. It is particularly suitable for woks with a rounded base. Make sure that the wok ring is located securely in its correct position (see diagram).

  • Page 21: Energy-Saving Tips

    Energy-saving tips – Use a lid whenever possible to minimise heat loss. – Cook with as little water as possible. – Cooking times can be significantly reduced with a pressure cooker. – Reduce the power setting once the water has come to the boil or the oil is hot enough to fry in.

  • Page 22: Safety Features

    Safety features Thermo-electric ignition This appliance has a thermo-electric ignition safety device. If the flame goes out, for example if food has boiled over or if there is a sudden draught, and automatic re-ignition has been unsuccessful, the supply of gas to the burner will be cut off.

  • Page 23: Cleaning And Care

    Cleaning and care Do not use a steam cleaning appliance to clean this appliance. The steam could reach the electrical components and cause a short circuit. – The appliance should be cleaned regularly, preferably after each use. Allow the appliance to cool down to a safe temperature before cleaning.
  • Page 24 Cleaning Notes Clean stainless steel surfaces using an Printed surfaces Stainless steel Original Miele all purpose microfibre cloth or (Flame symbols) surfaces with a solution of warm water and a little washing-up liquid applied with a soft sponge. The printing can be damaged If required, stubborn stains can be removed if soiling (e.g.
  • Page 25 Cleaning and care To assemble the small, medium and large burners ^ Place burner head b onto burner base e so that the ignitor d and the ignition safety device c extend through their respective holes in the burner head. The burner head must click into place correctly.
  • Page 26 Cleaning and care To assemble the wok burner ^ Place burner head c onto burner base d so that the ignitor f and the ignition safety device e extend through their respective holes in the burner head. The burner head must click into place correctly.

  • Page 27: Problem Solving Guide

    Problem solving guide With the aid of the following guide, minor problems can be diagnosed and easily corrected without contacting Miele. Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
  • Page 28 The ignitor on the burner The mains fuse has tripped. If it has tripped, contact a qualified does not spark. electrician or Miele. - Food deposits have lodged themselves between the ignitor and the burner cap. Remove any soiling. See also "Cleaning and care".

  • Page 29: Optional Accessories

    Miele offers a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see back of manual for contact details). Cleaning products Original Miele ceramic and stainless steel cooktop cleaner 250 ml Removes heavy soiling, limescale deposits and light discolouration.

  • Page 30: Safety Instructions For Installation

    Safety instructions for installation Observe carefully the safety Fit the wall units and rangehood distances given on the following pages. before fitting the cooktop to avoid Do not use any joint sealant, unless damaging the surface. it is expressly stated to do so by the manufacturer.

  • Page 31: Safety Clearances

    Safety clearances Safety clearance above the cooktop Clearance underneath the cooktop A minimum safety clearance of 25 mm underneath the cooktop must be provided for the installation of the flexible gas connection hose and mains electrical cable. This clearance also prevents the obstruction of moving kitchen components underneath, e.g.
  • Page 32 Safety clearances Side / rear clearances to the cooktop Ideally the cooktop should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall at one side. On the other side, however, no unit or divider should stand higher than the cooktop (see illustrations).
  • Page 33 Safety clearances Before installing the appliance, check that the location provides the required clearances from combustible material and, if necessary, provide protection to adjacent surfaces as required by regulations. A gas appliance shall be installed such that the surface temperature of any nearby combustible surface* will not exceed 65 °C above ambient.

  • Page 34: Building-In Dimensions

    Building-in dimensions a Front b Building-in depth c Gas connection R 1/2 - ISO 7-1 (DIN EN 10226) d Mains connection box with mains connection cable, L = 2,000 mm e Electronics housing Please take careful note of the inset Max.
  • Page 35 Building-in dimensions IMPORTANT: When this cooktop is installed, a partition must be installed permanently beneath it at a distance no greater than 25mm. If the space beneath the cooktop is already occupied (ie. by an oven for example) the partition is not required.

  • Page 36: Installation

    Installation Flush-fit cooktops are only suitable for installation in granite, marble, tiled or solid wood worktops. For all other worktop materials, consult the worktop manufacturer whether it can be used with a flush-fit cooktop. This appliance requires a 900 mm wide base unit for installation.
  • Page 37 Installation ^ Make the worktop cut-out for the Granite and marble worktops cooktop in accordance with the building-in diagram. Remember to maintain a minimum safety distance (see "Safety instructions for installation"). ^ Feed the connection cable down through the cut-out. ^ Centre the cooktop b in the cut-out.
  • Page 38 Installation ^ Make the worktop cut-out for the Solid wood and tiled worktops cooktop in accordance with the building-in diagram. Remember to maintain a minimum safety distance (see "Safety clearances"). ^ Fix the wooden frame d 2 mm below the top edge of the worktop (see diagram).

  • Page 39: Securing The Appliance

    Securing the appliance After installation Secure the appliance as shown, using the fixings supplied. Ignite all the burners to check that they are operating correctly. 20 mm worktop The flame must not go out on the lowest setting, or when the control is turned quickly from the highest to the lowest setting.

  • Page 40: Electrical Connection

    H 05 V V-F correspond with the coloured markings (pvc insulated), available from Miele. identifying the terminals in your plug For extra safety it is advisable to install proceed as follows: a residual current device (RCD), with a –...

  • Page 41: Gas Connection

    Every appliance should have its own If the appropriate jets have not been isolating valve. supplied with the appliance you will need to contact Miele. The gas connection must be installed so that connection can be Conversion to another type of gas is made either from inside or outside described under the relevant section.
  • Page 42 Gas connection Gas pressure must be set by the The gas connection must be in approved gas fitter as shown on the accordance with the requirements of data plate: AS 5601 and national and local Natural gas 1.0 kPa regulations. ULPG (Propane/Butane) 2.75 kPa The relevant building regulations...

  • Page 43: Burner Ratings

    Burner ratings Nominal ratings Burner Gas type Highest setting Lowest setting MJ/h MJ/h Small ULPG Medium (2x) ULPG Large ULPG 16.0 (inner+outer) 7.1 (inner+ outer) 3.4 (inner) 0.8 (inner) ULPG 13.7 (inner+outer) 5.5 (inner+outer) 2.5 (inner) 0.6 (inner Total 41.7 12.6 ULPG 36.1...

  • Page 44: Conversion To Another Type Of Gas

    Conversion to another type of gas Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations. When converting to a different type of gas, all burner jets have to be changed.

  • Page 45: Changing The Main Jets

    Conversion to another type of gas Changing the jets Changing the main jets Disconnect the gas cooktop from Small, medium and large burners the electricity supply by switching off at the socket and withdrawing the plug or by disconnecting the mains fuse.
  • Page 46 Conversion to another type of gas Wok burner ^ Remove the burner cap ab and burner head c. ^ Using an M7 socket spanner, unscrew the main jet d. ^ Fit the correct jets securely (see jet table). ^ Secure the jets against inadvertent loosening with sealing wax.

  • Page 47: Changing The Small Jets

    Conversion to another type of gas Changing the small jets Wok burner To change the jets, the burner securing screws must first be loosened and the upper section of the appliance removed. ^ Pull the control knobs off. ^ Remove the burner components. ^ Unscrew the screws.

  • Page 48: Checking Operation

    Conversion to another type of gas Checking operation Check all gas fittings for leaks. ^ Reassemble the appliance. ^ Ignite all the burners to check that they are operating correctly. The flame must not go out on the lowest setting, even when the control is turned quickly from the highest to the lowest setting.

  • Page 49: After Sales Service, Data Plate, Warranty

    In the event of any faults which you cannot remedy yourself, please contact: – Miele (see back of manual for contact details). When contacting Miele, please quote the model and serial number of your appliance. These are given on the data plate.
  • Page 52 KM 2357 en - AU, NZ M.-Nr. 09 399 660 / 01...

Table of Contents