Table of Contents
Advertisement
The display shows momentary Tones on, and you hear a
short tone, indicating that the keypad tones are enabled.
Turning Voice Mute On or Off
You can enable and disable voice transmission, if needed.
Procedure:
Press the preprogrammed Voice Mute button to turn the feature
off or on.
OR
Follow the procedure below.
1
<
>
or
to VMut.
2
Press the Menu Select button directly below VMut.
3
The display shows momentary Voice mute off, and you
hear a short tone, indicating that the feature is disabled.
OR
The display shows momentary Voice mute on, and you
hear a short tone, indicating that the feature is enabled.
104
English
Using the Time-Out Timer
This feature turns off your radio's transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your
transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be
preprogrammed from 3 to 120 seconds, in 15-second intervals,
or it can be disabled entirely for each radio mode, by a qualified
radio technician.
Note:
You will hear a brief, low-pitched, warning tone four
seconds before the transmission times out.
Procedure:
1
Hold down the PTT button longer than the preprogrammed
time. You hear a short, low-pitched warning tone, the
transmission is cut-off, and the LED goes out until you
release the PTT button.
2
Release the PTT button. The timer resets.
3
Press the PTT button to re-transmit. The time-out timer
restarts and the LED lights up solid red.
Advertisement
Table of Contents
