ECS H61H2-M13 Manual page 59

Main Advanced
Memory Multiplier Configuration
Memory Multiplier
Memory Timing Configuration
CAS# Latency (tCL)
Row Precharge Time (tRP)
RAS# to CAS# Delay (tRCD)
RAS# Active Time (tRAS)
Write Recovery Time (tWR)
Row Refresh Cycle Time (tRFC)
Write to Read Delay (tWTR)
Active to Active Delay (tRRD)
Read CAS# Precharge (tRTP)
Four Active Windows Delay (tFAW)
Intel Graphics Configuration
GT OverColocking
Graphics Current
Graphics Core Ratio Limit
Graphics Voltage
Press <Esc> to return to the Performance Tunning page.
Press <Esc> to return to the M.I.B III menu page.
B.O.M.P Technology (Enabled)
This item allows users to enable or disable B.O.M.P technology. This function can
run safe setting to setup menu when system boot fail 3 times.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Command Rate (Auto)
This item allows users to set command rate.
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (3400 MHz)
This item shows the CPU speed.
Total Memory (1024MB(DDR3 1066))
This item shows the total memory of DDR3.
Chipset M.I.B III
10.67
7
7
7
20
8
59
4
4
4
20
Disabled
Normal
27
Default
Using BIOS
Boot Security
Disabled/Enabled GT
OverClocking
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
55
Exit