Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Type
Jumper
CLR_CMOS 3-pin
3-pin
USBPWR_R
3-pin
USBPWR_F
To avoid the system instability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Default Settings"
and then "Save and Exit Setup".
Description
1-2: NORMAL
2-3: CLEAR
Clear CMOS
Before clearing the
CMOS, make sure to
turn off the system.
Rear USB/PS2
1-2: VCC
Power Select
2-3: 5VSB
Jumper
Front Panel
1-2: VCC
USB Power
2-3: 5VSB
Select Jumper
Installing the Motherboard
Setting (default)
1
CLR_CMOS
1
USBPWR_R
1
USBPWR_F
9