ECS H61H2-M13 Manual page 57

Power Limit 2 Value (118)
Use this item to control Power Limit 2. PL2 provides an upper limit of the TDP
excursions. This is for Turbo mode.
Long Duration maintained (1)
Use this item to control the time window over PL1 value should be maintained. This
is for Turbo mode.
Enhanced Intel SpeedStep Technology (Enabled)
This item allows users to enable or disable the EIST(Enhanced Intel SpeedStep
Technology).
Turbo Mode (Enabled)
This item allows you to control the Intel Turbo Boost Technology.
1/2/3/4 Core Ratio (38/37/36/35)
These items show the Core Ratio limit value.
Press <Esc> to return to the Performance Tunning page.
Chipset Configuration
Scroll to this item to view the following screen:
Main Advanced
Memory Multiplier Configuration
Memory Multiplier
Memory Timing Configuration
CAS# Latency (tCL)
Row Precharge Time (tRP)
RAS# to CAS# Delay (tRCD)
RAS# Active Time (tRAS)
Write Recovery Time (tWR)
Row Refresh Cycle Time (tRFC)
Write to Read Delay (tWTR)
Active to Active Delay (tRRD)
Read CAS# Precharge (tRTP)
Four Active Windows Delay (tFAW)
Intel Graphics Configuration
GT OverColocking
Memory Multiplier Configuration
This item shows the information of Memory Multiplier Configuration.
Memory Multiplier (10.67)
This item determines the operation of DDR SDRAM memory CAS(column address
strobe). It is recommanded that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
Chipset M.I.B III
10.67
7
7
7
20
8
59
4
4
4
20
Disabled
Using BIOS
Boot Security
Disabled/Enabled GT
OverClocking
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
53
Exit