ECS H61H2-M13 Manual page 45

Parallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Main Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=5; DMA=3;)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Device Mode (ECP Mode)
This item shows the information of the device mode.
Press <Esc> to return to the Super IO Configuration page.
Press <Esc> to return to the Advanced Menu page.
Chipset M.I.B III
Enabled
IO=378h; IRQ=5; DMA=3;
Auto
ECP Mode
Using BIOS
Boot Security
Enabled or Disabled
Parallel Port (LPT/LPTE)
: Select Screen
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
41
Exit