Viessmann VITODENS 242-F Technical Manual page 58

Design information
Note
The adjustable feet give the height measurements of the connections
a tolerance of + 15 mm.
For connecting on-site lines on the gas, heating water and DHW sides
from within the wall.
Assembly kit comprising:
■ Plate heat exchanger for system separation of the heating circuit with
mixer
■ Circulation pump for the heating circuit with mixer
■ Three-way mixer with mixer motor
■ Mixer PCB, capable of communicating with the Vitotronic 200 via KM
BUS
Boiler plinth
Part no. 7352 259
6
VIESMANN
58
(cont.)
■ Adjustable bypass
■ Connection set for installation on finished or unfinished walls, with:
– Connecting pipes
– Shut-off valves for heating water flow and return with boiler drain
& fill valve
– 2 connectors for DHW
– Gas shut-off valve (R ½) with thermally activated safety shut-off
valve
■ Flow temperature sensor
■ Cover with the same design as the appliance
■ Balanced flue extension, boiler flue connection
■ For the installation of the Vitodens on unfinished floors
■ Adjustable height, for screed floors from 10 to 18 cm
■ With spacers (for downward connection) for installation on finished
walls
VITODENS