Pride Mobility Bebop Owner's Manual page 26

I X . A S S E M B L Y A N D D I S A S S E M B L Y
6. Connect the front-to-rear harness. See figure 15.
7. Replace the battery pack by lowering it straight down until it’s seated into place. See figure 16.
8. Replace the seat and rotate it until it locks into correct position.
9. Unlock the front wheel by turning the tiller lock knob 90° counterclockwise. See figure 17.
WARNING! Before getting onto your PTV always check that the tiller lock knob is in the unlocked
position. Attempting to ride your PTV with the tiller lock knob in the locked position can result in
personal injury.
UNLOCKED
POSITION
26
Figure 15. Front-To-Rear Harness
Figure 16. Lowering/Lifting Battery Pack
LOCKED
POSITION
Figure 17. Tiller Lock Knob
(Unlocked)
Figure 17A. Tiller Lock
Knob (Locked)
bebop