Sony MHC-GTR88 Operating Instructions Manual page 38

Play Timer/Recording Timer
Make sure you have set the clock.
Use the button on the remote for the
operation.
Play Timer:
You can wake up to disc, tuner or optional
USB device at a preset time.
Recording Timer:
You can transfer music from a preset radio
station into an USB device at a specified
time.
1
Prepare the sound source.
Play Timer
Prepare the sound source, and then
press VOLUME +/– to adjust the
volume.
To start from a specific track or file,
create your own program (page 33).
Recording Timer
Tune in the preset radio station
(page 34).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly to
select "PLAY SET" or "REC
SET", and then press ENTER.
"ON" appears, and the hour indication
flashes.
4
Set the time to start playing or
transferring.
Press ./> repeatedly to set the
hour, and then press ENTER. The
minute indication flashes. Use the
procedure above to set the minutes.
5
Use the same procedure as in
step 4 to set the time to stop
playing or transferring.
6
Select the sound source or
prepare the USB device.
GB
38
Play Timer
Press ./> repeatedly until the
sound source you want appears, and
then press ENTER. The display shows
the timer settings.
Recording Timer
Connect a transferable USB device to
the B port on the unit. The display
shows the timer settings.
7
Press "/1 to turn off the system.
To set the Recording Timer using the
controls on the unit (REC TIMER)
1
Tune in the preset station
(page 34).
2
Press REC TIMER.
"ON" appears, and the hour indication
flashes.
3
Turn OPERATION DIAL to set the
hour, then press ENTER.
The minute indication flashes. Use the
procedure above to set the minutes.
4
Use the same procedure as in step
3 to set the time to stop recording.
The display shows the timer settings.
5
Connect a transferable USB device
to the B port on the unit.
6
Press "/1 to turn off the system.
To activate or check the timer again
Unit:
Press REC TIMER, turn OPERATION
DIAL until "REC SELECT" appears, and
then press ENTER.
Remote:
Press CLOCK/TIMER SELECT, press
./> repeatedly until "PLAY
SELECT" or "REC SELECT" appears,
and then press ENTER.