Transferring Onto An Usb Device - Sony MHC-GTR88 Operating Instructions Manual

To change the AM tuning Interval
The factory setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use the buttons on the unit for the
operation.
1
Press TUNER/BAND repeatedly to
select AM band.
2
Press "/1 to turn off the system.
3
While holding down ENTER, press
"/1.
The system turn on automatically.
"AM 9K STEP" or "AM 10K STEP"
appears in the display.
When you change the interval, all the AM
preset stations are erased.
Tip
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
To reduce static noise on a weak
FM stereo station
Press FM MODE on the remote
repeatedly until "MONO" lights up in the
display. There will be no stereo effect, but
the reception will improve.
Transferring onto an
USB device
You can transfer music from a sound
source to an optional USB device by
connecting it to the
The audio format of files transferred by
this system is MP3.
For transferring from USB A to USB B
you can also transfer WMA and AAC file.
When transferring from audio files, the
file size is the same as the original file.
See "Compatible USB devices with this
system" (page 54) for a list of USB
devices that can be connected to this
system.
USB transferring and erasing is disabled
while the disc tray is open.
CD-USB Synchronized Transfer
You can easily transfer an entire disc onto
an USB device.
1
Connect a transferable USB
device to the
shown below.
When the USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
B port on the unit.
B port as
USB device
l
Continued
21
GB