Custom program
If you have a special combination of settings that you use
frequently, you can save these settings as a CUSTOM PROGRAM.
* To Save a Custom Program:
desired cycle.
cycle.
add. A confirmation message will be shown in the display.
NOTE
You may save only one custom program at a time. Pressing
and holding the CUSTOM PROGRAM button will overwrite any
previously saved custom program.
To Recall a Custom Program:
Steam functions
To Fill the Steam Feeder
until it clicks into place.
with water up to the MAX line. If not, the
displayed. Make sure that the steam feeder is filled with water
or the drawer is fully closed. Turn the dryer off then restart the
Steam Cycle.
substances, rinse agents, or detergents.
Drawer
empty.
generator will not work.
overflow.
drawer before starting the dryer.
WARNING
injury or death.
this warning can cause serious injury or death.
Water
ONLY
Steam
Feeder
NOTE
Failure to follow this warning can cause serious
37
HOW TO USE
will be
Failure to follow