Changing The Dryer Vent Location - LG DLEX8000W Owner's Manual

Changing the dryer vent location

WARNING
result in property damage, injury to person or death.
Your new dryer is shipped to vent to the rear.
An adapter kit, part number
from your LG retailer. This kit contains the necessary duct
components to change the dryer vent location.
exhaust duct.
Rear
Exhaust Duct
OPTION 1: SIDE VENTING
blower housing and secure to the base of the dryer as shown.
Adapter
Duct
, may be purchased
Retaining
Screw
INSTALLATION INSTRUCTIONS
sure that the male end of the elbow faces AWAY from the dryer.
Insert the elbow/duct assembly through the side opening and
press it onto the adapter duct. Secure in place with duct tape.
Attach cover plate to the back of the dryer with included screw.
Cover
Plate
Elbow
OPTION 2: BOTTOM VENTING
the base of the dryer as shown.
Adapter
Duct
the elbow faces down through hole in the bottom of the dryer.
Secure in place with duct tape.
Attach the cover plate to the back of the dryer with included
screw.
Cover
Plate
Elbow
19
1
1 / "
2
(3.8 cm)