To Use An Automatic Programme - Miele DG 6500 Operating And Installation Instructions

Automatic programmes
To use an Automatic pro‐
gramme
 Select
Automatikprogramme
A list of food types will appear in the
display.
 Select the food category.
The Automatic programmes available
for the food type selected will then ap‐
pear.
 Select the Automatic programme that
you want.
Each step you need to take before
starting the Automatic programme will
appear in the display.
In some programmes you will be
prompted on when to add food to the
oven. Follow and confirm these instruc‐
tions.
Notes on using these programmes
– The degree of doneness and brown‐
ing levels are shown in a bar chart
with seven segments. The factory
default is always the middle setting.
It will be highlighted. To change the
setting simply move the highlighting
to the left or the right.
– The weight entry in the Automatic
programmes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon weigh‐
ing 250 g at the same time.
– The oven interior needs to be at room
temperature before starting an Auto‐
matic programme.
32
– When placing food in an already hot
steam oven, be very careful when
opening the door. Hot steam can es‐
.
cape. Step back from the steam oven
and wait until the steam has dissipa‐
ted. When putting cooking containers
or the condensate tray into the oven
or taking them out, take care not to
spill the contents. Avoid contact with
hot steam, and do not touch the hot
oven interior walls. Danger of burning
and scalding.
– To end an automatic programme ear‐
ly, you need to switch the steam
oven off completely by touching .
Cancel cooking?
play. If
will be shown in the display.
– If by the end of an Automatic pro‐
gramme the food is not cooked
enough, select
– Automatic programmes can also be
saved as
will appear in the dis‐
is selected, the main menu
ja
nachgaren
User programmes
.
.