To Scan An Original, While Enhancing Black - Toshiba e-studio 2330c Imaging Manual

5.6 To Scan an Original, while Enhancing Black

Before the adjustment
Black is not dark enough, compared to the
original.
Explanation
When a full-color original is scanned, black is not dark enough, compared to the original. (In general, the
scanned-in image is likely to become less dark.) Finely adjust the black density of the scanned-in image, in
order to darken black and closely match it with the original hue.
* This adjustment will have an effect only on the image scanned in the Full color mode (including the Auto color
mode).
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
Scan
5-15
5. Scanning-specific Adjustments
After the adjustment
Black is enhanced and closely matched with
the original hue.
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Scan