Elation power spot 575 User Manual page 34

Power Spot 575™
6.2.4 Gently remove the old lamp from it's socket. If the old lamp has exploded be sure
to remove all of the old lamp fragments to prevent damage to the internal
components.
6.2.5 Replace the lamp with an approved replacement type. Be sure to follow all the
lamp handleing procedures included with your new lamp. Never handle the new
lamp with your bare hands, the oils from your skin may damage the lamp. Always
replace with the lamp with a lamp that meets the orginal lamp specification,
failure to do so may damage the unit and will void your manufactures warranty.
6.2.6 Before reassembing the unit, be sure the new lamp is securely seated in lamp
socket.
6.2.7 Reassemple the unit in reverse order.
6.2.8 Besure to reset the lamp running time in the „TIME" menu. The lamp run time is
designed to function as lamp replacement reminder. (see page 19).
Attention:
Be sure the lamp is securely seated in the lamp socket. Failure to comply
with this warning may cause excessive heat build-up that may cause the
internal lens to crack.
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com
34
- Page