Unsuccessful Connection - Honeywell VisionPRO 8000 User Manual

Unsuccessful connection

If you are unsuccessful in connecting the thermostat to the Wi-Fi network, you will
see a Connection Failed screen. Press
connection. Here are three specific reasons the connection might be unsuccessful.
For all Connection Failed screens, pressing
Invalid Password
The password you entered is invalid. Check
that you have the right password and try again.
No IP Address
The thermostat was unable to obtain an IP
address from the router. Verify the router is
correctly set up to automatically assign IP
addresses. This connection can take several
minutes. If there is still no connection, remove
the thermostat from the wallplate for 10
seconds, then snap it back into place.
button for other tips about this failed
t
Done
will return to the Menu screen.
42
Connection Failed
Invalid Password
Connection Failed
No IP Address
33-00066EFS—01
M35362
M35363