Z-Wave Connection Status - Honeywell TH6320ZW2003 User Manual

Z-Wave connection status

Z-Wave connection status is located in the
Wifi is on and
connected
upper-right corner of the screen.
• Thermostat is included and connected to a
Z-Wave network.
or wifi is not setup
Wifi is on and
connected
• Thermostat is excluded from a Z-Wave
network.
Wifi is on and
Wifi is off
connected
or wifi is not setup
• Thermostat is either included in a Z-Wave
network but the Z-Wave signal is lost, or
or wifi is not setup
is included but AC power is lost (battery
Wifi is off
used as backup). In this case, Z-Wave
radio is turned off to preserve battery life.
Wifi is off
AC power must be restored or you have to
change the power mode. It can be done via
excluding thermostat from Z-Wave network
and including again in battery power mode
where batteries are used as main power
source. You can check the actual power
mode in the thermostat
MENU/DEVICE INFO.
Following Schedule
Example of thermostat
included and connected in a
Z-Wave network.
10
AM
Mode Fan
Heat Auto
Away Home Sleep
Mode Menu Fan