Honeywell VisionPRO 8000 User Manual page 29

Adjusting humidification settings
MENU and select Humidification.
1 Touch
2 Select Auto.
3 Touch or
s t
Done
4 Touch to save your settings. Touch
Cancel
to ignore changes.
5 If frost or condensation appears on the
windows, touch MENU, then select
Protection. (Use a lower number to prevent
frost or condensation. Use a higher number
if indoor air is too dry.)
NOTE:
Window Protection is available only
if an outdoor air sensor is installed.
NOTE:
The thermostat controls
humidification and dehumidification as
needed to maintain the desired humidity
level. Depending on how your thermostat
was installed, the thermostat may maintain
a 15% separation between humidification
and dehumidification settings.
to select humidity level.
Window
28
Humidification
Window Protection
Humidification
Off Auto
33-00066EFS—01
MCR34100
MCR34128
MCR34129