Checking The Measurement Results; Reloading The Previous Ypao Adjustments - Yamaha RX-V779 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
HDMI HDMI
1 1 2 2 3 3 4 4
5 5 V-AUX V-AUX
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 AUDIO AUDIO TUNER TUNER
BLUETOOTH BLUETOOTH USB USB NET NET
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
ON SCREEN
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN
RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
ENT ENT
9 9 0 0 MEMORY MEMORY

Checking the measurement results

You can check the YPAO measurement results.
1
After the measurement, use the cursor keys to
select "Result" and press ENTER.
• You can also select "Result" from "Auto Setup" (p.102) in the "Setup" menu,
which displays the previous measurement results.
The following screen appears.
1
1
Measurement result items
2
Measurement result details
3
The number of measured positions (when multi
measure is performed) * RX-V779 only
2
Use the cursor keys to select an item.
Polarity of each speaker
Wiring Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency
Size
signals effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance Distance from the listening position to each speaker
Level Output level adjustment for each speaker
3
To finish checking the results and return to the
previous screen, press RETURN.

Reloading the previous YPAO adjustments

When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
1
In the "Setup" menu, select "Speaker", "Auto
Setup", and then "Result" (p.101).
2
Use the cursor keys to select "Setup Reload" and
2
press ENTER.
3
3
To exit from the menu, press ON SCREEN.
41
En