Connect To The Nvr; Use Device Search Utility - Planet Networking & Communication NVR-810 User Manual

3. Connect to the NVR

There are various ways you can connect to the NVR
suggested methods for different network setup:
. The NVR is placed in
by using "Device Search" Utility.
. The NVR is placed in a network without DHCP server (or you are
connecting to it directly): Access NVR with its default IP (192.168.0

3.1 Use Device Search Utility

If the NVR is placed in a corporate network or a local area network
DHCP serv er is already presented, please install the "Device Search"
the bundled C
T o begin, launch the "Device Search"
installation.
a network with a DHCP serv
D disk.
and below are the
er: Connect to the NVR
utility from the CD and proc
.20).
where a
utility from
eed with the