Advertisement
7. Startup the first client connection
7.1 Knowing the default MESH AP setting
The default settings of MESH AP for
client access are as below:
Wireless Access Point:
[Network -> WLAN-> Radio2]
SSID: PLANET
Hide SSID: Enabled
Wireless Frequency: Auto
1. To make sure the first connection accurately, it is suggested to configure /
Hint
2. Turn off Hide SSID can help to quick finding the AP if there is no security
LAN IP Configuration:
[Local Services -> DHCP Server]
DHCP: Enable
double check the Radio 2 to 802.11g.
concern for this first installation.
Advertisement
