Download Print this page

Kenmore 106.86399310 Use & Care Manual page 13

Advertisement

Available languages

Available languages

Temperature
Control
When
you plug
in the refrigerator
for the first time,
set the
Temperature
Control
to Recommended
Setting
(middle
dot).
IMPORTANT.
Recommended
Setting
"OFF
Turning the Temperature
Control to OFF stops cooling in the
refrigerator
and freezer compartments,
but it does not
disconnect the refrigerator
from the power supply.
The Temperature
Control
regulates
the temperature
in both
the refrigerator
and freezer
compartments.
Settings
to the
left of the Recommended
setting
make
the temperature
less
cold. Settings
to the right
of the Recommended
setting
make
the temperature
colder.
Wait
24 hours before
you put food
into your
refrigerator.
If
you add food
before
the refrigerator
has cooled
completely,
your
food
may spoil.
NOTE: Adjusting the Temperature
Control to a higher
(colder) setting will not cool the compartments
any faster.
The recommended
setting
should
be correct
for normal
household
usage. The controls
are set correctly
when milk or
juice
is as cold as you like and when ice cream
is firm.
If the temperature
is too warm or too cold in the refrigerator
or freezer, before adjusting the controls, first make sure the
air vents are not blocked.
Adju#
the Temperature
Control
NOTE: Wait at least 24 hours between adjustments and then
recheck the temperatures.
CONDITION/REASON:
ADJUSTMENT:
REFRIGERATOR too warm
Temperature
Control
one setting higher
FREEZERtoo warm/too
little ice
Temperature
Control
one setting higher
REFRIGERATOR too cold
Temperature
Control
one setting lower
FREEZERtoo cold
Temperature
Control
one setting lower
Freezer Control
The Freezer control is located on the back wall of the freezer. It
regulates the amount of air flowing between the freezer and the
refrigerator
compartments.
When
you plug
in the refrigerator
for the first time,
turn the
Freezer
control
to Recommended
Setting.
Freezer Control
COLDEST
Recommended
COLD
Adjust the Freezer
Control
If you want to temporarily
increase the cold air flow to a
specific compartment,
adjust the control.
IMPORTANT: Once the performance
is achieved, return the
Freezer control to the Recommended
setting to keep the
refrigerator
operating
at optimum efficiency.
CONDITION/REASON:
ADJUSTMENT:
Heavy ice use
Max Freezer
Hot room temperature
Max Freezer - To maintain
ice making production
rate
Large quantity of groceries
Max Refrigerator
- To
quickly chill food and
beverages
Crisper Humidity Control (on some models)
You control the amount of humidity in the moisture-sealed
crisper. Depending on the produce you are storing, select the
desired Humidity Level.
Humidity Level - Low Setting
LOW--
HIGH--
MEDIUM
Humidity
Control
LOW (open) lets moist air out of the crisper for best storage of
fruits and vegetables with skins.
Fruit. Wash, let dry and store in refrigerator
in plastic bag
or crisper. Do not wash or hull berries until they are ready to
use. Sort and keep berries in original container in crisper, or
store in a loosely closed paper bag on a refrigerator
shelf.
Vegetables
with skins: Place in plastic bag or plastic
container and store in crisper.
HIGH (closed) keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain and trim or tear off
bruised and discolored
areas. Place in plastic bag or plastic
container and store in crisper.
13

Advertisement

loading

This manual is also suitable for:

106.86392310106.86393310