Installation Clearances; Optional Duct Cover Accessories - Monogram ZV48T Installation Instructions Manual

Advance Plannin
INSTALLATION CLEARANCES
These vent hoods are designed to be installed onto a wall
or beneath a soffit or cabinet.
. Install these hoods* 30" rain, to 36" max. above the
cooking surface,
*These hoods mag be installed 24" min. above a gas or
electric drop-in stgle cooktop. Alwags observe the 30" to
36" clearance when installed over ang professional stgle
cooktop or range.
Note: Clearances mag varg due to tgpe of cooking product
and local codes. Check with local inspectors to be sure stan-
dard is applicable.
Soffit Installation
SOFFIT
36" MAX.
In this installation the ductwork running from the top
of the hood will be concealed in the soffit or upper
cabinetry.
Wall Mount Installation
36" MAX.
][ }l .................
For this installation, a decorative duct cover is
available to conceal the ductwork running from
the top of the hood. Use of the duct cover requires
special consideration to the installation height above
the countertop.
OPTIONAL DUCT COVER
ACCESSORIES
Standard decorative duct covers are available in 6" and
12" heights. Duct covers mag be stacked, in various
combinations, to conceal the ductwork running from the
top of the hood to the ceiling.
. Before gou begin, gou should determine the
installation height of the hood and order the correct
size duct cover. The duct covers should be ordered at
the same time as the vent hood and be on site before
installation. Order the duct cover corresponding to gout
model.
Standard Duct Covers
6" Duct Cover
12" Duct Cover
6" Duct Covers
Hood Model 6" Duct Cover Dimensions
ZV48T, ZV48S ZX48DC6 6"H x !9-!!/!6"W x !!-7/8"D
ZV36T, ZV36S ZX36DC6 6"H x !5-3/4"Wx !!-7/8"D
ZV30T, ZV30S ZX36DC6 6"H x !5-3/4"Wx !!-7/8"D
12" Duct Covers
Hood Model 12" Duct Cover Dimensions
ZV48T, ZV48S ZX48DC!2 !2"H x !9-!!/!6"W x !!-7/8"D
ZV36T, ZV36S ZX36DC!2 !2"H x !5-3/4"W x !!-7/8"D
ZV30T, ZV30S ZX36DC!2 !2"H x !5-3/4"W x !!-7/8"D
49 80151 8 5