Maintenance - Makita BO5012 Instruction Manual

MAINTENANCE

1. Applying wax
002536
Use an optional sponge pad. Apply wax to the sponge
pad or work surface. Run the tool at low speed to
smooth out wax.
NOTE:
• First, wax a not conspicuous portion of the work surface
to make sure that the tool will not scratch the surface or
result in uneven waxing.
• Always run the tool at low speed. Running it at high
speed may cause the wax to spatter.
2. Removing wax
002537
Use an optional felt pad. Run the tool at low speed to
remove wax.
3. Polishing
002538
Use an optional wool pad. Run the tool at low speed and
apply the wool pad gently to the work surface.
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY, repairs, car-
bon brush inspection and replacement, any other mainte-
nance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita
replacement parts.
9